2.1.2    Toolbars

Toolbars provide access to commands in a form of buttons.

results_toolbars

 

button_tooolbar_config - opens Config dialogue for managing all calculated results curves

button_tooolbar_references - opens Reference Location dialogue enabling virtual shift of reference plane position

button_tooolbar_xy - switches the display to XY (Cartesian) orthogonal chart

button_tooolbar_polar - switches the display to Polar chart

button_tooolbar_smith - switches the display to Smith chart or Rieke chart for SWR

button_tooolbar_dyn - switches on/off dynamic (at every FDTD iteration) results refresh

button_tooolbar_ext - switches on/off extended S-Parameters results

button_tooolbar_pbal - switches on/off S-Parameters power balance results

button_tooolbar_swr - switches on/off Standing Wave Ration and Group Delay results

button_tooolbar_3db - calculates and shows 3dB bandwidth for Decibel scale. The following presses of this button switches between consecutive modes of 3dB bandwidth display.

button_tooolbar_gammak - switches on/off Gamma at Reference planes post-processing results

button_tooolbar_tuning - opens Set Frequency dialogue for setting frequency value for sinusoidal excitation in manual tuning of BHM regime

combo_polarisation - change polarisation for radiation pattern results

combo_gain - change gain scaling for radiation pattern results

button_tooolbar_2dchart - opens Radiation Patterns dialogue for changing 2D radiation pattern parameters

button_tooolbar_ntffreq - shows results curves for the next NTF Frequency available on the list

button_tooolbar_ribbon - hides all Results window Toolbars and shows the Results window Ribbon

button_tooolbar_lin - sets Linear scale

button_tooolbar_db - sets Decibel scale. Certain quantities cannot be converted to decibel scale.

button_tooolbar_qu - sets Quadratic scale. Certain quantities cannot be converted to quadratic scale.

button_tooolbar_set - opens Scaling dialogue for setting scale parameters

button_tooolbar_choice - opens Scale Choice dialogue for assigning results curves to Left or Right scale

button_tooolbar_lr - activates Left and/or Right scale. Invoking the following commands will  apply to the active scale(s): button_tooolbar_auto, button_tooolbar_de1, button_tooolbar_def2, button_tooolbar_def3

button_tooolbar_de1 - sets Defined Scale 1 settings to Left and/or Right scale, depending on the chosen scale activity

button_tooolbar_def2 - sets Defined Scale 2 settings to Left and/or Right scale, depending on the chosen  scale actvity

button_tooolbar_def3 - sets Defined Scale 3 settings to Left and/or Right scale, depending on the chosen scale activity

button_tooolbar_auto - changes selected Left or Right scale to automatic

button_tooolbar_setdef - opens Scaling dialogue for setting scale parameters for Defined Scales

 

Toolbars can be switched on with button_export_toolbars button available in the Results window Ribbon or with Switch->Switch to Toolbars command from main menu or context menu.

Results window Ribbon can be switched on with button_ribbon button from the toolbar or with Switch->Switch to Ribbon command from main menu or context menu.