3.1.6    Status Bar

Status Bar is the lower part of the 1D Fields window and shows various information about the state of the 1D Fields window.

The first and second part of the status bar contain the information about Phi and Theta angles for Ephi or Etheta components for NTFFA post-processing chosen in the Choose NTFFA Postprocessing dialogue.

The next section contains the following information:

• for hidden envelope lines - number of FDTD iteration at which the results were displayed or refreshed:

• for shown envelope lines - number of FDTD iterations when envelope was started and number of FDTD iterations for envelope construction:

• for Temperature and Enthalpy components - number of BHM heating step at which the results were displayed or refreshed:

The following section contains information about the scale that is set: Linear (Lin.) or Decibel (dB) and information whether the scale is automatic (Auto) or manual (Manual).

The next section contains information about the domain: space, time or contour. For the time domain additional information is displayed (i.e. ) if refresh every iteration is greater than 1 (can be set in Position & Parameters dialogue).

The following section displays:

• for time domain: the x, y and z coordinates in FDTD cells:

• for space domain along X axis: the y and z coordinates in FDTD cells:

• for space domain along Y axis: the x and z coordinates in FDTD cells:

• for space domain along Z axis: the x and y coordinates in FDTD cells:

• name of the point chosen in the Choose Source/Probe/Lumped dialogue:

• name and type of the contour chosen in the Choose Contour dialogue:

• name of the source chosen in the Choose Source dialogue:

• name of the NTFFA post-processing chosen in the Choose NTFFA Postprocessing dialogue:

The last section shows the name of the project that the results are extracted from and number of current and all simulators.